Edward Bulmer Portland

Hex #E1D7C1RGB 225, 215, 193LRV ≈ 68Lightness 86/100

Opens Edward Bulmer’s page, where you can order a tester or a full tin.

Edward Bulmer is typically £28.00 a litre, based on a 2.5L tin mixed to your colour, checked Sept 2026. Retailers vary, and bigger tins work out less per litre.

Portland is a pale beige from Edward Bulmer. Its closest match from another brand is Camel Tan by Johnstone's (near-identical).

Closest matches from other brands

One from each brand. The badge shows its price bracket. The number is how far apart the two colours are: under 2 is near-identical. How it’s worked out.

Camel TanJohnstone's£near-identical · 0.4
Light SandFarrow & Ball£££near-identical · 0.4
MuslinBenjamin Moore£££near-identical · 0.7
Double LinenZoffany£££near-identical · 1.1

Lighter & darker

This colour, stepped evenly from dark to light.

More matches from other brands

HalvaTikkurila£££near-identical · 1.2
Green MarlDulux Heritage££near-identical · 1.4
Hay BaleDulux£near-identical · 1.5
Sand IVPaint & Paper Library£££near-identical · 1.6
Oyster WhiteSanderson£££near-identical · 1.6
Palest SatinValspar£near-identical · 1.7
Green Stone - LightLittle Greene£££very close · 2.1
Duvet DayCOAT£££very close · 2.1
Old WhiteFired Earth£££very close · 2.4
Tintern StoneCraig & Rose££very close · 2.4
FlaxLakeland Paints£££very close · 2.4
Almond CreamCrown£very close · 2.5
Honest JohnMylands£££very close · 2.7
Donkey RideEarthborn£££very close · 3.1
Beige 03Lick££very close · 3.2

Pairs well with

Each has a different job, named on the card. They are picked by rule from every brand here, leaning to Edward Bulmer where it has a good fit. Keep a contrast or accent to small areas. How to choose colours that go together.

Woodwork and ceilingsPolar BearZoffany
Deeper toneHampshire GrayBenjamin Moore
Colour accentCadet BlueSanderson
Cooler neutralSpring IrisBenjamin Moore

Edward Bulmer Emulsion

Edward Bulmer’s matt for walls and ceilings. Highly breathable, and suitable for new lime and gypsum plaster.

Finish
Dead matt, 2% sheen
Coverage
12 m² a litre
Coats
2
Second coat after
4 to 6 hours
Tins
2.5L and 5L

From Edward Bulmer’s own data sheet, checked Nov 2026. Coverage depends on the wall. Work out how much you need with the calculator.

Not quite right?

Use the colour tool to find a lighter, darker, warmer or cooler version of this colour across all 12,658 paints.

Open Portland in the colour tool →

If you found PaintDial useful…

Buy Will a coffee on Ko-fi